DTECH DT-7036 4 ports VGA Super Extender 200M

DT-7020 vga extender is used at the exhibition place of VGA,high-definition television,set-top boxes,DVD,projection equipment factory,data monitoring center,large conference exhibition center,schools and companies.

DT-7020A 200M vga extender is used at the exhibition place of VGA,high-definition television,set-top boxes,DVD,projection equipment factory,data monitoring center,large conference exhibition center,schools and companies.

100m distance transmission.Using 3+6vga cable,the transmission distance of the input end can be up to 10 meters,and the transmission distance of the output end can be up to 10 meters,real-time signal synchronization without delay transmission.

Professional Factory VGA KVM Extender 100M 1920*1080P@60HZ VGA KVM Extender Over Cat5 Cable 100Meters

Suitable for devices with standard HDMI interface, compatible with versions 2.0 and below.

Welcome to use our high quality video converter series product! HDMI to AV high-definition converter, can convert high-definition HDMI signal into AV (CVBS) composite video signal and FL/FR stereo audio signal

DTECH DT-7056 HDMI 4X1 Quad multi-viewer with IR supports multi-channe high-definition audio & video signal as single image that  is displayed in the same device or a variety of video  segmentation modes.The audio signal of corresponding can be transmitted without delay when segmenting images. Supporting 1080P@60Hz resolution and HDMI signal.It can be finished one-to-one video channels by buttons and infrared remote controller.With stable transmission signal, simple operation and etc.,it is suitable for video conferencing systems, monitoring, hypermarkets

HDMI to VGA signal converter, can convert HDMI digital signal to VGA analog video signal and 3.5 mm stereo audio signals, high-definition HDMI signal is converted into analog audio and video signal available for common monitor, projectors and others , easy connection with VGA interface display, projector, etc.

This universal USB2.0TORS422/RS485 converter requires no external power supply and is compatible with JSB2.0, RS422 and RS485 standards. It can convert a single end USB signal into a balanced differential RS422 or RS485 signal, providing a surge protection power of 600W per line. And various reasons of the surge voltage generated on the line and minimal electrode capacitance to ensure the RS422/RS485 interface high-speed transmission, RS422, RS485 end through the DB9 male connector. Internal converter with zero delay automatic transceiver conversion, onlySome /○ circuits automatically control the direction of the data flow without any handshake. For example, (such as RTS, DTR, etc.) no jumper cable Settings to achieve full duplex (RS422), half duplex (RS485) mode conversion, plug and play. Ensure that all existing communication software and interface hardware is suitable.

DTIB-0708 Male to Female Industrial RS232 to RS232 Serial Optoelectronic Isolator Converter   Ⅰ.Product Parameters Product Name RS232 Optoelectronic Isolator Model DTIB-0708 Interface Comply with EIA/TIA-RS232-F and CCITT V.24 asynchronous protocols Gender M-F Transmission Mode Asynchronous full-duplex transparent transmission Isolation Voltage ≦3500V rms ESD Protection ±15KV IEC61000-4-2 air discharge, ±8KV IEC61000-4-2 contact discharge Transmission Rate 300bps~115200bps Standard Comply with IEC60601-1 requirements Communication Standard Distance 15m at the front and back ends of the product Power Supply The product can work normally without external power supply (using serial port charge mercury power supply technology to achieve product self-power supply) Operating Environment -40℃~85℃, relative humidity is 5%~95% Warranty 1 Year Ⅱ.Product Descriptions   This product is an RS232 serial port isolation protector (ISOLATORS), which uses advanced digital isolation technology to protect the devices at both ends of the RS232 serial interface, avoiding damage to RS232 devices caused by environmental factors such as ground loop voltage, surge, inductive lightning, static electricity, hot plugging, etc., and improving the stability of equipment operation. Ⅲ.Product Connection Diagram      

Dtech High Definition USB to female DB9 serial port Converter Cable Support USB 2.0 Standard to RS232 1.8m Cable

This HDMI extender uses a CAT 5e/6 cable to extend HD signals up to 120 meters and can reach 1080P. It not only breaks the limitation of HDMI cable transmission length, but also is more convenient and flexible, and saves cost for customers. This product uses standard TCP/IP protocol to transmit high-definition audio and video equipment through LAN. It can transmit HDMI high-definition video of your DVD, player, computer and other equipments with CAT5E/6 cable, up to 120 meters.