DTECH DT-5051 USB 2.0 to RS232 cable FTDI chip

DT-9031 is a converter between the asynchronous serial port RS232/422/485 and Ethernet, which is an independent intelligent device with a CPU, an embedded OS and a complete TCP/IP protocol stack.

DT-5018 USB to Serial (DB9) and DB25 Cable is your fast solution to utilize the peripheral with serial port and DB25 port  in an easy-to-use environment such as plug-n-play and hot swap function.

DT 5019 is a kind of USB to RS-485/422 industrial intelligent converter and no power need.

This product is a RS232/ RS422/ RS485 to TCP/ IP serial port server, with internal integration of TCP/ IP protocol stack , which can realize two-way transparent transmission of network data packets and serial data , with TCP CLIENT, TCP SERVER , UDPCLIENT, UDP SERVER , etc. Four working modes , the serial port baud rate can support up to 115200bps , which can be easily configured through the host computer software that this product is equipped with , which is convenient and fast. Products are widely used in industrial automation control systems , access control systems , time and attendance systems , credit card systems , POS systems, building automation systems, power systems , monitoring systems, data acquisition systems andbank self-service systems 

This product supports Alibaba Cloud and DTECH Cloud.

This product supports Alibaba Cloud and DTECH Cloud.

This product supports Alibaba Cloud and DTECH Cloud.

This product supports Alibaba Cloud and DTECH Cloud.

DTECH DT-7046R ip extender extends HDMI signal up to 120m with a cat6 cable and support 1080P.

This USB2.0 extender adopts USB standard 2.0 protocol, compatible with 1.1 protocol. It can break the constraint of computer host to USB cable length. Users can connect a standard USB port via the sender’s end at the computer host, and can use 4 standard USB ports at the receiver’s far end via single LAN cable. It can be widely used in the fields of computers, education, bank security systems etc. 

This HDMI cascading extender uses a CAT 5e/6e cable to extend the HD signal up to 50 meters, and can reach 4K. It can be extended through the multi-level connection of the receiving end, and it can also realize a transmitter, and multiple receivers do not need to go through the switch. Concatenated cascade transmission (up to 5 receivers). It is widely used in computer teaching systems, high-quality multimedia displays, video conferences, computers, LCD plasma high-definition display venues, digital home theaters, exhibitions, education, finance, scientific research, meteorology and other fields.

IOT9011 Industrial RS232 to 232 Converter DB9 Serial Photoelectric Isolator Protector   Ⅰ.Product Parameters Product Name RS232 Optoelectronic Isolator Model IOT9011 Interface Comply with EIA/TIA-RS232-F and CCITT V.24 asynchronous protocols Gender M-F Transmission Mode Asynchronous full-duplex transparent transmission Isolation Voltage ≦3500V rms ESD Protection ±15KV IEC61000-4-2 air discharge, ±8KV IEC61000-4-2 contact discharge Transmission Rate 300bps~115200bps Standard Comply with IEC60601-1 requirements Communication Standard Distance 15m at the front and back ends of the product Power Supply The product can work normally without external power supply (using serial port charge mercury power supply technology to achieve product self-power supply) Operating Environment -40℃~85℃, relative humidity is 5%~95% Warranty 1 Year Ⅱ.Product Descriptions   This product is an RS232 serial port isolation protector (ISOLATORS), which uses advanced digital isolation technology to protect the devices at both ends of the RS232 serial interface, avoiding damage to RS232 devices caused by environmental factors such as ground loop voltage, surge, inductive lightning, static electricity, hot plugging, etc., and improving the stability of equipment operation. Ⅲ.Product Connection Diagram