High Speed 80Gbps 16K DisplayPort to DisplayPort Video Cable 1.5m DP2.0 AM/AM HD Cable Support HDCP2.2

DT 5019 is a kind of USB to RS-485/422 industrial intelligent converter and no power need.

DTECH IOT9024I RS485 Photoelectric Isolation Hub 4 ports Ⅰ. Product parameters Product name RS-485 photoelectric isolation hub 4 ports Model IOT9024I Communication mode Compatible with RS-232, RS-485 TIA/EIA standards Communication rate 300bps-921600bps Communication distance 1200m Working power supply DC9-38V Working mode Asynchronous half-duplex (RS-485) Photoelectric isolation 2500Vrms per port Lightning and surge protection RS-485 provides 600W lightning protection, surge, ±15KV per line ESD protection and prevention of common ground interference Use environment -20℃ to 80℃, relative humidity 5% to 95% System support Applicable to the communication software used, plug and play Functional features Each group can send and receive data separately (no need for multiple buses to switch between send and receive modes at the same time), each group can connect 32 RS485 devices. Warranty 1 Year Ⅱ. Product description

DT-5018 USB to Serial (DB9) and DB25 Cable is your fast solution to utilize the peripheral with serial port and DB25 port  in an easy-to-use environment such as plug-n-play and hot swap function.

DT-9077 fiber modem implements advanced optic transmission technology to extend signal transmission distance up to 120km on single-core fiber

Special Features: 1. support 4k*2,3D 2. 3 HDMI inputs,2 HDMI outputs 3. DTS audio formst-DTS-HD/Dolby-trueHD/LPCM7.1/ DTS/DOLBY-AC3/DSD/HD(HBR) 4. Transmission distance:25m,input 15m,output 10m

DTECH DT-6514A SDI TO HDMI CONVERTER

DTECH Transmitter and Receiver Fiber Extender with HDMI/KVM Extender over Fiber 20KM 4K@60HZ   Ⅰ. Product Parameters Product Name Fiber Extender with KVM Brand DTECH HDMI Version 4K@60Hz / HDCP2.2 HDMI Resolution The highest input resolution is 3840*2160@60Hz Audio Format L-PCM Fiber Wavelength 1310nm; 1550nm Fiber Transmission Distance 20km The Maximum Operating Current 1.5A/5V DC(TX), 1.2A/5V DC (RX) Operating Temperature Range -10℃～+55℃ WDimension (L x W x H) 106x106x17(mm) Weight TX:272.1g RX:273.1g Ⅱ. Product Introduction HDMI fiber extender is a device transmitting HD audio and video signal via bidirectional single fiber cable. It transmits your HD display with the high resolutions up to 20km. It support IR, RS232 and KVM function.By using bidirectional single fiber LC interface, it has the characteristics of low cost and stable signal transmission. It can be used in security monitoring, high-definition signals between buildings, square large screens and other long-distance HDMI signal transmission fields. Ⅲ. Product Features *Support HDMI 4K@60Hz/HDCP2.2; * Support transmitter HDMI Loop out; * Support 3.5mm stereo output; * Support IR; * Support KVM; * Support RS232; * Comply with SFP MSA and SFF-8472 standard protocol; * Pure hardware design, plug and play, do not need to install additional software; * Support 4K to 1080P resolution (Downscaling). Ⅳ. Product List 1: HDMI fiber extender transmitter 1PC 2: HDMI fiber extender receiver 1PC 3: DC 5V/2A power supply 2PCS 4: User manual 1PC 5: IR Cable 1PAIR

Compatible with multiple Windows systems.

Applicable to connecting computers with various serial devices.

A reliable and stable point-to-point and point-tomultipoint communication can be ensured by DT-9016 photoelectric RS485 isolation interface converter.

DT-5028 20m usb extension cable supports all USB2.0 standard equipment: camera, mouse, keyboard, card reader, U disk, USB barcode scanners, and other digital devices.