Audio Video Products
Products
Home

Industrial Serial Product

Industrial serial converter

DTECH Waterproof IP65 Data Transfer Serial RS232 RS485 Wireless Transmission Station to LORA DTU TPUNB Converter

New Products

DTECH Waterproof IP65 Data Transfer Serial RS232 RS485 Wireless Transmission Station to LORA DTU TPUNB Converter

High gain, high receiving sensitivity, and very strong wall penetration ability. At the same distance, compared with LORA products, it can transmit more data and the transmission speed is faster. At the same time, the amount of data will not lose packets, which solves the problem of LORA's small amount of data for long-distance transmission, the problem of packet loss.

  • Product Origin:

    China
  • Brand:

    DTECH
  • Item NO.:

    IOT9062
  • Shipping Port:

    Guangzhou/Shenzhen
Product Details

DTECH Waterproof IP65 Data Transfer Serial RS232 RS485 Wireless Transmission Station to LORA DTU TPUNB Converter 



RS232/485 wireless data transmission station DTU

5km long distance wireless transmission
The cost is reduced and more convenient. There are no restrictions on connecting terminal equipment. There are no line safety risks. The transmission distance is long. It gets rid of tedious wiring. It does not distinguish between the sending and receiving ends, and it is easy to maintain the equipment.

RS232/485 wireless data transmission station DTU
Interface display, clear at a glance
Spread far, spread much, spread fast
The conventional configuration can not only achieve normal communication of 5km, but also ensure 255-byte data transmission (no need to cache packets), the air rate can reach 76.8kbps, and can easily handle low-latency, high-concurrency and multi-scenario applications.

RS232/485 wireless data transmission station DTU
Wireless parameter configuration, intelligent adaptive self synchronization
The product connection terminal is not limited by the number of devices. The RS485 port can connect 256 devices, and the RS232 port can connect 1 device. RS485 and RS232 can transmit data simultaneously. The bidirectional transmission adopts queue transmission technology to ensure that data is not lost, and the retransmission technology scheme ensures that encrypted data is transmitted more securely.

RS232/485 wireless data transmission station DTU
ISM band is free to use
Wide spread spectrum range, wider frequency band
Network-free wireless frequency band is 410MHz - 510MHz, multiple frequency bands can be used
Serial port baud rate range 1200bps - 115200bps
Over-the-air baud rate range 2400bps - 76800bps
Support Modbus data transparent transmission

RS232/485 wireless data transmission station DTU
IP65 waterproof shell
6KV lightning protection and surge protection
Waterproof, lightning-proof, cold-resistant, and heat resistant, it can handle most outdoor scenes with ease and is not afraid of harsh environments. DTU can be configured and debugged at any time without the need for disassembly, making it more convenient for application. It has a higher lightning protection level, better waterproof effect, and a wider range of applications.

RS232/485 wireless data transmission station DTU
Blind plug design, no need to distinguish between sending and receiving ends
The product supports point-to-point, point-to-multipoint, and multipoint-to-multipoint wireless transceiver functions. It does not limit which end is the transmitter or the receiver. It is very convenient for maintenance personnel and is more flexible and widely used. It is more widely used in debugging.

RS232/485 wireless data transmission station DTU
Wide range of applications to meet various industrial needs
This product provides a standard signal interface and can directly realize the following application scenarios through TPUNB wireless function.
1. Industrial application industrial control machines, industrial automation instruments, long-distance irrigation equipment,
Access control, security control systems, Highway Weighbridge Data Transmission, commercial cash registers and other equipment connections
2. Slowly changing physical quantities, ultra-low power consumption sensors
Temperature, water pressure, PM2.5, electromagnetic sensor
3. Wireless meter reading
Smart electricity meter, smart water meter, smart gas meter, heat meter, etc.
4. Remote I/O controller
Lighting control, air conditioning control
5. Wireless alarm
Smoke detector, pyro infrared

A free consultation

Email us with any questions or inquiries or use our contact data. We would be happy to answer your questions.

Related Products
Passive industrial converter
DT-9000 Passive RS232 to RS485 converter

DT-9000 is compatible with RS-232C,RS422, RS-485 standard.

Data Protection Industrial Converter
DT-9003 Passive RS232 to RS422/RS485 converter

DT-9003 is compatible with RS-232,RS422, RS-485 standard.

Passive RS232 photoelectric isolation protector
DTECH DT-9011 Passive RS232 photoelectric isolation protector

DT-9011 is a kind of RS232 system communication serial port optic isolation product.

RS485 repeater
DTECH DT-9016 Industrial photoelectric isolation RS-485 repeater

A reliable and stable point-to-point and point-tomultipoint communication can be ensured by DT-9016 photoelectric RS485 isolation interface converter.

Active RS232 to RS485 RS422 converter
DTECH DT-9026 Active RS232 to RS485 RS422 converter

Compatible with the Recommended Standards of RS-232C, RS-422 and RS-485, UT-208 photoelectric isolation interface converter can convert the single-ended RS-232 signal into balance differenced RS-422 or RS-485 signal.

RS232 to RS485 RS422 interface converter
DT-9028 Industrial grade lightning protection RS232 to RS485 RS422 interface converter

DT-9028 is an industrial-grade optical isolation multifunctional converter with external power supply, it compatible with RS-232/RS-485/RS-422 standard.

fiber modem
DTECH DT-9077 Industrial-grade high-speed RS232/RS485/RS422 3 in 1 fiber modem Instruction

DT-9077 fiber modem implements advanced optic transmission technology to extend signal transmission distance up to 120km on single-core fiber

RS232 to RS485
Dtech Passive RS232 to RS485 Standard Converter High Quality plug and play DB9 Adapter

Dtech Passive RS232 to RS485 Standard Converter High Quality plug and play DB9 Adapter

IOT9031B
Industrial Grade POE RS422/485 to TCP IP Serial Server DV9V-70V 1A 100M Ethernet for Computer PC

This product is a RS232/ RS422/ RS485 to TCP/ IP serial port server, with internal integration of TCP/ IP protocol stack , which can realize two-way transparent transmission of network data packets and serial data , with TCP CLIENT, TCP SERVER , UDPCLIENT, UDP SERVER , etc. Four working modes , the serial port baud rate can support up to 115200bps , which can be easily configured through the host computer software that this product is equipped with , which is convenient and fast. Products are widely used in industrial automation control systems , access control systems , time and attendance systems , credit card systems , POS systems, building automation systems, power systems , monitoring systems, data acquisition systems andbank self-service systems .

IOT9019
Industrial grade active RS232 nine-wire fully functional photoelectric isolation repeater Industry Converter Adapter for Industrial Product

Active rs232 photoisolator 9 wire full optically isolated protection 2000vrms optically isolated

dt-9000
Industrial Grade Passive RS232 to RS485 Converter Black DB9 Connector 300-115.2KBPS DB9 to RS485 Converter Adapter for Industry

 This converter can provide reliable connectivity for point-to-point or point to multipoint communication .Data communication rate is 300bps~38400bps..Supported communication methods is RS-232 to RS-485 converter.

© Copyright: 2024 Guangzhou Dtech Electronics Technology Co.,Ltd. All Rights Reserved.

Chat now

Live Chat

    Email us with any questions or inquiries or use our contact data. We would be happy to answer your questions.