DTECH DT-7020 VGA EXTENDER 100M over cat5

DT-7020A 200M vga extender is used at the exhibition place of VGA,high-definition television,set-top boxes,DVD,projection equipment factory,data monitoring center,large conference exhibition center,schools and companies.

DT-7036 4 ports vga extender 200m is 4 VGA output, 1 VGA input and local 1 UTP remote output and display, projector, HDTV used together.

100m distance transmission.Using 3+6vga cable,the transmission distance of the input end can be up to 10 meters,and the transmission distance of the output end can be up to 10 meters,real-time signal synchronization without delay transmission.

Professional Factory VGA KVM Extender 100M 1920*1080P@60HZ VGA KVM Extender Over Cat5 Cable 100Meters

Suitable for devices with standard HDMI interface, compatible with versions 2.1 and below.

DT-6650C Full HD 1080P HDMI Cable 50m male to male HDMI 1.4v built-in IC-Signal amplifier chip is a high quality hdmi cable, transmit hdmi signal, supports full HD 1920*1080p video format.

DTECH 1080P HDMI RS232 IR Function Fiber Video Extender 20km 4K 60Hz with KVM   Ⅰ. Product Parameters Product Name Fiber Extender with KVM Brand DTECH HDMI Version 4K@60Hz / HDCP2.2 HDMI Resolution The highest input resolution is 3840*2160@60Hz Audio Format L-PCM Fiber Wavelength 1310nm; 1550nm Fiber Transmission Distance 20km The Maximum Operating Current 1.5A/5V DC(TX), 1.2A/5V DC (RX) Operating Temperature Range -10℃～+55℃ WDimension (L x W x H) 106x106x17(mm) Weight TX:272.1g RX:273.1g Ⅱ. Product Introduction HDMI fiber extender is a device transmitting HD audio and video signal via bidirectional single fiber cable. It transmits your HD display with the high resolutions up to 20km. It support IR, RS232 and KVM function.By using bidirectional single fiber LC interface, it has the characteristics of low cost and stable signal transmission. It can be used in security monitoring, high-definition signals between buildings, square large screens and other long-distance HDMI signal transmission fields. Ⅲ. Product Features *Support HDMI 4K@60Hz/HDCP2.2; * Support transmitter HDMI Loop out; * Support 3.5mm stereo output; * Support IR; * Support KVM; * Support RS232; * Comply with SFP MSA and SFF-8472 standard protocol; * Pure hardware design, plug and play, do not need to install additional software; * Support 4K to 1080P resolution (Downscaling). Ⅳ. Product List 1: HDMI fiber extender transmitter 1PC 2: HDMI fiber extender receiver 1PC 3: DC 5V/2A power supply 2PCS 4: User manual 1PC 5: IR Cable 1PAIR

Starlink Cable Ethernet Adapter Star link  Kit V2 Gen 2 Satellite Internet Accessories Connect Routers Cables Starlink

DT-6502 is a Display Port to HDMI signal format converter for interfacing next generation DisplayPort based PC and Notebook computers with high definitions displays.

DTECH DT-HF306 HDMI 2.0 AOC FIBER CABLE 4K@60HZ 444 46M

This is an ultra-high-definition HDMI splitter that supports 3D and 4K * 2K resolution. It can easily distribute one ultra-high-definition signal to multiple displays that support ultra-high-definition signals. In addition, when it is connected to the signal output end of an HDMI cable, the HDMI signal can be amplified. The HDMI splitter can be widely used in all fields that require HDMI signal distribution and combination: military industry, multimedia teaching, video conference, large screen display, exhibition, finance, scientific research, meteorology, supermarket, conference system and other fields.

Support HDMI optical fiber cable transmission 300 meters, three cascade transmission, support ordinary HDMI 20 meters transmission, 4k60hz ultra-clear image quality, 18Gbps ultra-high broadband, HDR dynamic picture smooth, rich color gradation, EDID intelligent identification screen resolution, HDMI signal one point Two, two displays on the same screen, simultaneous audio and video transmission, widely used in notebooks, ps game consoles, tablet computers, digital cameras, camcorders, high-definition players, projectors, pcs, mobile phones, automotive electronic equipment